A phone connected by blue paths to a decorative QR-style card and a card representing manual setup details.

Your camera will not recognise the eSIM code, or the phone recognises it and then rejects installation. Those are different problems. The safest first step is the same: check whether the profile has already been added before trying to install it again.

If your eSIM QR code is not working, first check your phone's installed SIMs. If the profile is missing, use a clear copy of the code, a supported same-phone installation method or manual details supplied by your provider. If the code is rejected as used or invalid, stop repeated attempts and ask the provider to check it. Do not delete a working profile to make room for another scan.

What it means when an eSIM QR code will not scan

An eSIM QR code passes installation information to your device. It is not a generic Wi-Fi password, and scanning it is not the same as confirming that your data plan is active.

Symptom Useful next step
The camera never detects the code Check image clarity and try the phone's documented eSIM setup flow.
The code is detected but installation fails Read the exact error; check compatibility, connectivity and whether the profile already exists.
The phone reports that the code is used or invalid Ask the provider to verify the code's status rather than repeatedly scanning it.
The profile is installed, but data does not work

Leave the QR stage and use the connected but no internet guide when that matches the symptom.

First check whether the eSIM profile is already installed

Open your phone's SIM settings and look for the new line. On iPhone this is normally Settings → Cellular or Mobile Data. On Pixel, use Settings → Network & internet → SIMs. Other Android menus vary.

Compare the line label and available details with your provider's instructions. If you cannot identify it confidently, ask support before removing anything. An interrupted installation screen does not prove that no profile was added.

If the correct profile is present, follow its activation instructions. A pending activation or an installed line with no data needs a different check, not another download of the same profile.

Scan from another screen or use the supported same-phone method

If the profile is genuinely missing, keep the phone connected to reliable internet and open the original QR image supplied by the provider. Display the whole code on another screen or a private printout, avoid reflections, and keep its edges visible. Do not crop away part of the pattern or use a blurred thumbnail.

On iPhone, Apple documents scanning a carrier QR with the Camera app. On iOS 17.4 or later, a QR received in a supported email or browser context can also offer Add eSIM when you touch and hold it. If that option does not appear, do not assume every app or saved screenshot supports the same method.

Some providers offer direct installation through their app or a link instead. Airalo's help page, for example, describes a direct iOS method and manual alternatives. Use the method provided for your own account and device; there is no universal button shared by all eSIM services.

Install with manual activation details only if your provider supplies them

Manual setup can bypass a scanning problem. It cannot make an invalid, already-redeemed or incompatible profile valid.

  1. Open the installation instructions inside the provider's official app, website or original message.
  2. Look for a manual-installation option. Depending on the device, it may supply an SM-DP+ address, an activation code and possibly a confirmation code. These are provider-issued setup details, not values you should invent.
  3. Follow the device-specific path to enter those details. Apple documents a manual-entry option in its cellular-plan setup; Android labels and expected formats vary.
  4. Copy the supplied fields carefully, respecting the format in the instructions. Do not paste an APN into an activation-code field: they serve different purposes.
  5. Check that the new profile appears before proceeding to the provider's activation steps.

If no manual details are available, ask support whether direct installation or a replacement code is supported. Do not upload your code to a public QR-decoding website to extract the contents.

“Already used” and “not valid”: what the error may mean

These messages can be associated with an earlier installation, a code that cannot be reused, an expired offer or another provider-side restriction. The wording alone does not identify which applies to your account.

Check the current phone and, if relevant, the device used during the first attempt. Do not assume that deleting a profile from one phone releases it for a second phone. Transfer and replacement rules belong to the provider.

Apple explicitly discourages deleting an eSIM as a troubleshooting step unless the carrier directs it. Keep the profile while support checks whether you need activation help or a replacement.

iPhone and Android differences

On iPhone, Apple lists QR, carrier activation, supported links/apps and manual entry as different setup paths. Which ones you can use depends on the carrier. Follow the path the provider actually offers rather than trying every option.

On Pixel, Google's dual-SIM guidance describes adding an eSIM from the SIM settings. Other Android devices may use a SIM manager or another menu. The exact model and regional version must support eSIM; check device compatibility if the setup option is missing.

A carrier lock can also limit adding another provider. A perfectly clear QR code cannot solve a compatibility or carrier-lock restriction.

When to request help or a replacement code

Contact the provider if its documented method fails, the code is rejected, or the expected installation details are missing. Send the exact error, phone model, operating-system version, order reference and whether the profile already appears in SIM settings.

Ask a precise question: “Is this profile already installed, or do I need a replacement installation code?” That helps separate a scan problem from an account or activation problem. Use official private support; redact the QR, activation string and personal identifiers from public screenshots.

Questions about QR codes

Do all eSIM QR codes expire?

There is no expiry rule that applies to every provider. Check the terms supplied with the exact code and package.

Can I use the same QR on another phone?

Only if the provider's transfer or reuse rules allow it. A reusable eSIM service does not automatically mean the original installation code works on unlimited devices.

Is it safe to share my eSIM QR code?

Treat it as private setup information. Do not put it in social posts, public support threads or shared image albums. Use only the provider's official support route if they need to inspect it.

Where Moontel fits

Moontel lets you complete surveys and get free mobile data without a credit card to start. Once a successful completion is confirmed, follow the installation instructions shown in your account. Keep the reusable profile installed; repeated scanning or deletion is not how you add more earned data. Survey availability and rewards vary.

Sources

Official sources checked 23 October 2026. Installation methods depend on your provider, phone model and software version.

Related reading

Complete surveys. Get free mobile data.

Start without a credit card, install your Moontel eSIM when it is ready and keep the same profile for future trips. Follow the setup instructions in your account.